Skip to main content

What are the methods for line marking in parking lot and garage ?

 What are the methods for line marking in parking lot and garage ? In order to regulate road safety, various roads and  garages are filled with different types of markings. There are two main construction methods for line marking, namely cold spray marking and hot melt marking. Combining the effects of the two, hot melt marking is the most widely used method.

www.fsgrk.com

grk-wendy@foshangrk.com.cn

whatsApp:008613660776067

1. Cold spray marking

Cold spray marking is also called normal temperature marking, which refers to the method of drawing lines directly by diluting the marking paint and then using a cold spray marking machine without heating the paint. The color is clear and the process is relatively simple.



2. Hot melt marking

Hot-melt marking refers to the melting of the marking paint in the paint bucket by heating it. It is generally composed of thermoplastic resin, pigments and fillers, reflective materials and other additives. The hot-melt coating is powdery at room temperature. It will dry. In order to prevent the hot-melt paint from peeling, the paint primer is usually applied. Some pavements will also be sprinkled with reflective glass beads to increase the reflective recognition at night; for hot-melt road coatings, its fluidity It is a very important technical indicator in the construction process. It adjusts the proportion of glint in the coating. Under the premise of ensuring the quality, the coating has good fluidity and the proportion of coating resin cannot be too small. This ascribing method is much more complicated than cold spray ascribing.



Compared with the two, hot-melt marking is more popular than cold spray marking because it is wear-resistant, longer-lasting, and safer.

Labels:

Comments

Post a Comment

Popular posts from this blog

Synthetic Sports Flooring Used Instruction

  1.  Synthetic Sports flooring  only for teaching, training and competition, not for parking or others usage 2.  The flooring edge should be protected, not allow to move or pull. If damage, it should be repaired in time. 3.  Athletes can wear professional sports shoes during the competition, but the length of the spikes should not exceed 6mm. 4.  It is forbidden to wear high heels into the stadium. 5.  It is strictly forbidden to drive, park and stock goods. 6.  Avoid put the organic solvents in the synthetic flooring, including gasoline, oil, diesel and thinner. 7.  It is forbidden to use all chemicals, including athlete-treated drugs and adhesive items such as chewing gum. 8.  In general, the synthetic flooring should be kept clean. In high temperature, it is recommended to use water to cool down to improve the service life. 9.  When the synthetic sports flooring is oily, it can be cleaned with natural detergent, etc., avoid usin...
Post a Comment
Read more

Cement embossed floor

Post a Comment
Read more

Suelos deportivos sintéticos utilizados Instrucción

  1.  Pavimento deportivo sintético  solo para enseñanza, entrenamiento y competición, no para estacionamiento u otros usos 2.   El borde del piso debe estar protegido, no debe moverse ni tirar. Si el daño, debe ser reparado a tiempo. 3.  Los atletas pueden usar calzado deportivo profesional durante la competencia, pero la longitud de los picos no debe exceder los 6 mm. 4.  Está prohibido llevar tacones altos en el estadio. 5.  Está estrictamente prohibido conducir, estacionar y almacenar mercancías. 6.  Evite colocar los solventes orgánicos en el piso sintético, incluyendo gasolina, aceite, diesel y diluyente. 7.  Está prohibido usar todos los productos químicos, incluidos los medicamentos tratados con atletas y elementos adhesivos como el chicle. 8.  En general, el suelo sintético debe mantenerse limpio. En temperaturas altas, se recomienda usar agua para enfriarse para mejorar la vida útil. 9.  Cuando el piso sintético para ...
Post a Comment
Read more