Skip to main content

Stadium standard design plan

 With the continuous development of society, rubber stadium are also entering people’s lives more and more. They are not only a gathering place for a variety of sports, but also a venue for many large-scale events. Let’s look at the optimal plan design for sports.

FOSHAN GRK COMMERCIAL CO LTD

Contact:Wendy

email:grk-wendy@foshangrk.com.cn

(1) Competition items: The IAAF Track and Field Facilities Standard Manual stipulates the standard sports track inner circle circumference is 400 meters, of which the radius of the curve should be 36.5 meters, and the straight road should be along the north-south direction to avoid the dazzling influence when the sun position is low. The curve should have 8 lanes, each lane is 1.22 meters wide, and the straight road has 8 to 10 lanes. The safety area inside and outside the track shall be no less than 1 meter. It is necessary to mark the end position of the competition, mark the position of the obstacle course pool, and mark the intersection of the vertical axis and the horizontal axis of the track and field field.

2) Throwing events: The positions of the high jump area and the pole vault area are generally one in each of the north and south semicircles.



① Discus throwing facilities include throwing ring, cage and drop area.

② Hammer throw facilities include throwing ring, cage protection and landing area. Discus throwing and hammer throwing throwing rings can be designed with a concentric circle method.

③The javelin throwing facilities include the auxiliary runway and the arc landing area with a radius of 8 meters. It is generally designed on the longitudinal axis of two semicircles in the track and field field.

④The shot put facilities include the throwing circle, the toeboard and the landing area. The shot put area can be set in a semicircle, or on the four corners of the track .

(3) Jumping event venue:

①The long jump bunkers are symmetrical in the north and south. The two bunkers are separated by 90~100m between the double-assisted track. The pit is 4.27m wide, and the bunker is best located on the outside of the track.

②The high jump area includes a semi-circular runway assist area and landing area. The pole vault area includes a runway assist, hand pole insertion hole bucket and a landing area.

(4) Football match field: A 68m*105m standard football match field is set up in the center of the track and field .

(5) Positions to be determined:

① The precise positions of the rostrum and stands are set up in the track and field stadium.

②The location of the barbed wire wall is built around the track and field field.

③Accurate location of inner ring drainage ditch and outer ring drainage ditch.

④The position of the flagpole where the national flag is raised in the track and field.

Comments

Popular posts from this blog

what is the standard tennis court size ?

  The "Rules of Tennis Competition" promulgated by the International Tennis Federation and the National Sports Commission stipulate that the area of a standard tennis court shall not be less than 36.6 meters (north-south length) × 18.3 (east-west width) meters = 669.78 m2, which is also a standard tennis court. The net size of the net around the site or the inner wall of the indoor building. Within this area, the standard size of the effective doubles field is: 23.77 meters (length) × 10.98 meters (width) = 260.9 m2, There should be a margin of not less than 6.40 meters behind each end line, and a margin of flow of not less than 3.66 meters beyond each side line. Install net posts on the court, measure the center of the two posts, the distance between the posts is 12.80 meters, and the top of the net post is 0.914 meters from the ground. If it is two or more parallel tennis courts built together. The distance between the sides of adjacent venues is not less than 4.0 meters. ...

Application of SBR granules on rubber track

  The quality of the   SBR granules   will affect the use effect of the Synthetic rubber   track. Therefore, the selection of good SBR granules   is very important for the rubber   track . So what kind of applications are there for the SBR granules   in the running track? What are rubber granules   of synthetic rubber track ? The rubber granules   of the rubber   track are evolved from a kind of reclaimed rubber. Generally speaking, SBR granules   are peeled off from old tires and then processed. In addition, there are colored granules . For example, colored rubber granules , EPDM rubber granules , etc., and different granules   have different functions, some granules   have a beauty effect, and some granules only play an auxiliary role. N ormal ly   , SBR granules   usually present irregular geometric shapes, and such a shape and structure can effectively improve the stability of the overall structure of the ...

Why do many people choose artificial grass instead of natural grass?

  Comparison of artificial turf and natural grass  With the development of society, the cost of using artificial turf is much less than that of natural turf. The key is that it is more convenient to use and more effective. The daily maintenance cost of natural lawns is too high, and some countries and regions cannot afford it due to economic reasons. Natural grass cannot grow under extreme climatic conditions. Natural grass cannot be planted in some covered stadiums. In contrast, artificial turf has the characteristics of high frequency of use, easy paving, simple maintenance, and quick drainage. All these advantages make artificial turf have a broad development space and have a great tendency to replace natural grass.  Safety The surface temperature of artificial turf varies greatly, especially in summer. Studies have found that the maximum temperature can reach 52°C. Such a high temperature will have a great impact on the athlete's competitive state and personal safety...