Skip to main content

Two major reasons why the one-component silicone PU does not dry or dry slowly on the construction site

 The curing principle of one-component silicone PU is moisture curing (or called water vapor curing), so the glue forming medium on site is water vapor. During the construction process, the material does not dry or dry slowly, and the reason is only insufficient water and dilution. There are two main reasons for the mismatch of agents.

silicone PU


FOSHAN GRK COMMERCIAL CO LTD is one of the Chinese supplier for the silicone PU ,with good price and best service.

whatsApp:008613660776067 ,facebook: paintfloor.GRK

1. Not dry or slow dry due to insufficient water

When the air humidity is appropriate and the basic dryness is appropriate, the amount of water required for each company's product formulation design is not necessarily the same. In order to make it easy for the construction team to adjust on site and avoid accidents when doing things based on the feeling, Greens berg improved the production process during the production of the factory, vacuumed the materials, and carried out the second reaction purification and other processes, so that every batch The material achieves zero water content and environmental protection before leaving the factory. As long as the foundation of the construction site is dry (moisture content is less than 5%), and the air humidity is less than 60% (non-moisture and non-sticky), it can be added according to the amount of water within 2% of the weight of the elastic material. Fully stir the construction, that is, 30kg/barrel and add 600g water , A bottle of 500g water is a little more, and the reaction is complete, and there will be no non-drying or slow-drying phenomenon. Of course, the master needs to adjust the amount of small water appropriately according to the site foundation and the air humidity is not up to the construction conditions. If the water consumption is not enough, the site will not dry or dry slowly. If the water consumption is too large, the site will foam. In the same field, there are areas that are dry and some areas are not dry, which must be caused by uneven water use or uneven mixing. Uneven mixing will also cause local bubbling and foaming. The normal design drying time of the site is 12 hours. If the site is not dry after the normal drying time, the site will have wet mud, sticky feet, sticky dust, water washing and fading.

2. Non-drying or slow-drying phenomenon caused by mismatched thinner

During construction, diluent need to be added to control leveling. Alcohol-containing tar-grade diluent (methanol, ethanol) will directly destroy the molecular structure of the material, resulting in insufficient reaction and slow drying. The physical The performance will not meet the design requirements and affect the service life.

Labels:

Comments

Post a Comment

Popular posts from this blog

Synthetic Sports Flooring Used Instruction

  1.  Synthetic Sports flooring  only for teaching, training and competition, not for parking or others usage 2.  The flooring edge should be protected, not allow to move or pull. If damage, it should be repaired in time. 3.  Athletes can wear professional sports shoes during the competition, but the length of the spikes should not exceed 6mm. 4.  It is forbidden to wear high heels into the stadium. 5.  It is strictly forbidden to drive, park and stock goods. 6.  Avoid put the organic solvents in the synthetic flooring, including gasoline, oil, diesel and thinner. 7.  It is forbidden to use all chemicals, including athlete-treated drugs and adhesive items such as chewing gum. 8.  In general, the synthetic flooring should be kept clean. In high temperature, it is recommended to use water to cool down to improve the service life. 9.  When the synthetic sports flooring is oily, it can be cleaned with natural detergent, etc., avoid usin...
Post a Comment
Read more

Plancher de sport synthétique utilisé Instruction

  1.  Sols sportifs synthétiques  uniquement pour l'enseignement, l'entraînement et la compétition, pas pour le stationnement ou autres usages. 2.  Le bord du plancher doit être protégé, ne pas pouvoir bouger ou tirer. Si dommage, il devrait être réparé à temps. 3.  Les athlètes peuvent porter des chaussures de sport professionnelles pendant la compétition, mais la longueur des pointes ne doit pas dépasser 6 mm. 4.  Il est interdit de porter des talons hauts dans le stade. 5.  Il est strictement interdit de conduire, garer et stocker des marchandises. 6.  Évitez d'introduire des solvants organiques dans le revêtement de sol synthétique, notamment de l'essence, de l'huile, du diesel et des diluants. 7.  Il est interdit d'utiliser tous les produits chimiques, y compris les médicaments traités par les athlètes et les éléments adhésifs tels que les chewing-gums. 8.  En général, le sol synthétique doit rester propre. A haute température, il e...
Post a Comment
Read more

Dimensiones de la cancha de bádminton

  Las dimensiones de un tribunal  de bádminton  son mandatos de la Federación Mundial de Bádminton (BWF) y son universalmente aceptados. Las medidas no han cambiado desde que se establecieron en 1934. El  bádminton  se juega típicamente en pisos del hardwood o las esteras de goma sintéticas hechas específicamente para el bádminton. El tribunal mide 44 pies de largo y 20 pies de ancho y se divide por una red en dos mitades idénticas. La corte estándar contiene líneas para los individuales y dobles jugar. Doublesplay es designado por las líneas exteriores, mientras que los singles utilizan la línea de base y la línea lateral. La cancha de dobles tiene la misma longitud que la cancha de individuales, pero la línea lateral exterior la hace 18 pulgadas más ancha.   Badminton Court Lines Todas las líneas están normalizadas para ser de 1,57 pulgadas de ancho. Esta medida es esencial porque las líneas se consideran parte de la pista. Si el volante toca cualquier pa...
Post a Comment
Read more